久久久亚洲色-国内精品综合久久久40p-欧美 日韩 人妻 高清 中文-精品一区二区三区无码视频-亚洲乱亚洲乱妇50p

Your Current Position:  Common problem
  • Adhesion

    Adhesion is the interaction that develops between two dissimilar bodies when they are in contact. At the molecular level, adhesion is based on physical and in some cases chemical bonding. The strength of adhesion depends on the type of adhesive.


    Pressure sensitive adhesives build up adhesion under light pressure. The ultimate bonding strength is reached after 24 ~ 72 hours.

     

    1.jpg


    Test method: “peel adhesion test” and "initial tack - rolling ball" . For specific data, please refer to TDS.


    Adhesive failure describes the separation of adhesive either from backing or from the substrate. The other basic failure mechanism of an adhesive bond is “cohesive failure” which refers to a fracture in the middle of the bulk adhesive.

     


  • Adhesive

    Adhesives are polymer materials that are used to join dissimilar materials. Adhesives may be classified in many ways, e.g. by mode of application and setting, chemical composition, cost, and suitability for various adherents and end products.


    The term "pressure sensitive adhesive" (PSA) is used to describe adhesives that are permanently tacky in dry form at room temperature. The most common pressure sensitive adhesives are acrylics, natural rubber/resin, and synthetic rubber/thermoplastic rubber. For comparison of basic properties, please refer to the following table:

    1.jpg


  • Ageing resistance

    1.jpg

    Degree of reliable performance of the tape over time, under certain conditions. Depending on the adhesive system being used, PSA tapes are often usable for permanent applications. This permanence is reflected by the resistance of the adhesive against:

    - Ozone (O3), Oxygen (O2)

    - UV light: relevant for transparent substrates such as glass or PC; under direct exposure, yellowing or discoloration of the adhesive or backing (e.g. window bars).

    - Temperature - Humidity, water

    - Different kinds of chemicals …


    Generally acrylic adhesives are much better suited to withstand these environmental influences than rubber adhesives and can maintain their permanent, reliable functionality over many years.


  • Backing

    Materials which “carry” the adhesive. The backing also reinforces the PSA tape and improves handling and processing properties. Most commonly used backing types are: 

    1. Film backings (e.g. PET, PP, PVC, PE)

    2. Paper based backings (e.g. non-woven, tissue)

    3. Foam backings (e.g. PU-, PE-, PVC-foams)

    4. Woven cloth (e.g.rayon, cotton, PA, PET) A specialty PSA tape type is a transfer PSA tape which has no backing. The adhesive is directly coated on the liner.

    5. Other less typical backing materials are cloth, fabrics, metals etc. Overview of backing material characteristics:

    1.jpg


  • Cohesion

    Cohesion describes the inner strength of the adhesive. It mainly determines the holding power (shear resistance of the tape. Test method: “shear resistance test”.

    1.jpg

    Cohesive failure leaves adhesive residue on both the PSA tape backing and the laminated surface, showing that the adhesive broke internally. Easy check with the finger: it sticks on both the substrate and the tape.

    Basically: high cohesion = higher temperature resistance = lower tack = high holding power

    2.jpg


  • Conformability

    The backing of a PSA tape influences its ability to adhere to curved, rough or irregular surfaces. Conformable backings increase the contact area of adhesive and substrate. Foam backings are inherently conformable and can therefore compensate for surface irregularities between the two bonding substrates.

  • Dimensional stability

    Correlates with humidity of liners. Dimensional stability prevents the liner from showing an irregular surface or dimensional change due to absorption of moisture.

    Dimensionally stable liners are mainly PE coated paper liners and Film liners.


  • Double-sided tape

    Comprised of a backing material coated with adhesive on both sides. Usually one adhesive layer is covered with a release liner (closed side) in order to wind the PSA tape in roll form. In d/s tape production the backing is often pre-treated with a primer to enable a maximum anchorage between backing and adhesive. Transfer tape.

    1.jpg

  • Fish eyes

    Optical effect caused by entrapment air between different tape layers on a roll.


  • Foam

    Material containing small holes (cells) distributed throughout the entire body. Most common foams are:

    -AC-foam Ethylene

    -vinylacetate

    -foam (EVA) Polyurethane

    -foam (PU) Polyethylene-foam (PE)


主站蜘蛛池模板: 国产成人综合精品无码| 人人色在线视频播放| 情欲少妇人妻100篇| 无码高潮喷吹在线播放亚洲| 少妇人妻av无码专区| 五十路熟妇强烈无码| 狠狠躁夜夜躁人人爽蜜桃| 特级毛片| 国产精品免费久久久久电影 | 无码人妻精品中文字幕不卡| 色妺妺视频网| 亚洲精品无码久久毛片波多野吉衣| 国产午夜精品久久精品电影| 国产精品青青在线观看爽| 欧美一区内射最近更新| 久久精品无码一区二区三区不卡| 熟女少妇在线视频播放| 免费精品国偷自产在线2020| 99久久成人精品国产网站 | 久久99国产乱子伦精品免费| 亚洲精品国产综合麻豆久久99| 麻豆一区二区三区蜜桃免费| 九色综合九色综合色鬼| 3d动漫精品啪啪一区二区 | 国产香蕉尹人在线观看视频| 用舌头去添高潮无码视频| 免费无码又爽又刺激高潮| 99久久国产综合精品女图图等你| 亚洲欧美日韩中文加勒比| 精品厕所偷拍各类美女tp嘘嘘 | 精品国产一区二区三区久久久狼| 亚洲自偷自偷图片自拍| 亚洲日本乱码一区二区产线一∨ | 欧美国产伦久久久久久久| 在线日本国产成人免费不卡| 大色欧美| 99久久99久久精品国产片| 亚洲精品四区麻豆文化传媒| 狠狠做五月深爱婷婷| 99精品人妻无码专区在线视频区| 精品少妇人妻av无码专区|